Monday, March 12, 2012

Solving Error E27 MP160 Printer

To reset E27 ( ink absorber full or platen waste ink absorber full ) for Canon MP160 Printer do this steps :
1. Turn off the printer
2. Press and hold Reset button
3. Pres and hold Power button
4. Release Reset button
5. Press Reset button twice
6. Release Power button
7. Wait until the power Led green and not blink
8. Press Reset button four times
9. Turn off the printer and unplug the power source
10. Turn ON again, and your printer should be normally

I have tried this steps just now and success.

2 Comment

Brother Inkjet Cartridges
saw this page bookmarked and very much liked what I read. I will surely bookmark it as well and also go through your other posts tonight.

thank you for your visit and comment, i will visit back your site soon.
thanks


EmoticonEmoticon